PLATE AND STRUCTURAL STEEL SCRAPS

Kangen Uttaradit Sc

  • PLATE AND STRUCTURAL STEEL SCRAPS0
  • PLATE AND STRUCTURAL STEEL SCRAPS1
Наведите на изображение, чтобы его увеличить
9-02-16
US $550,00 / Т
1 000,00 Т
T/T
loose in containers
27 день(ни).

Данные Товара

Much of the steel used in structures can be recycled—for example, leftover steel from crop ends, used open hearth steel plates, shearings and broken steel tires. The Institute of Scrap Recycling Industries (ISRI) designates this as “structural and plate scrap.”

The ISRI indicates that structural and plate scrap must be clean and contain less than 0.05 percent sulfur or phosphorus. It must also be cut to lengths of 5 feet or less for use in foundries and casting furnaces. Structural and plate
scrap is available in the following designations.

Plate and Structural SteelISRI-231
ISRI-231 is plate and structural steel scrap cut to a maximum of 5 feet long x 18 inches wide, with a minimum thickness of 1/4 inch. Scrap can be clean steel plates, structural shapes, shearings, crop ends or broken steel tires. Phosphorus and sulfur content must not exceed 0.05 percent.

ISRI-232
ISRI-232 is plate and structural steel scrap cut to a maximum of 5 feet long x 24 inches wide, with a minimum thickness of 1/4 inch. Scrap can be clean steel plates, structural shapes, shearings, crop ends or broken steel tires. Phosphorus and sulfur content must not exceed 0.05 percent.

Madison Steel is a global supplier of recycled steel products, including structural and plate scrap, shredded scrap, HMS 1 and HM2 and more. We also supply quality steel wire, PC strand, and other quality manufactured steel products, offering direct-from-manufacturer volume shipments at low cost. For more information on our recycled steel and other products, call us at 404-343-4855.

ISRI SPECIFICATIONS
231 Plate and structural steel, 5 feet and under.
Cut structural and plate scrap, 5 feet and under. Clean open hearth steel plates, structural shapes, crop ends, shearings, or broken steel tires. Dimensions not less than 1/4 inch thickness, not over 5 feet in length and 18 inches in width. Phosphorus or sulfur not over 0.05 percent.
232 Plate and structural steel, 5 feet and under.


Смотреть Больше

Подтверждающие Документы

Подтверждающие документы не найдены.

Деловые Данные

7-02-2016
we export world wide copper,aluminium,nickel,stones,brass,aluminium etx
Отправить эту страницу: