Данные Товара
One of the most common forms of wrought iron and steel scrap, heavy melting steel (HMS) is recyclable steel derived from a variety of sources—for example, railroad wheels, ship plates, construction scrap, auto and truck bodies, and so on—and cut into individual pieces not greater than 60 x 24 inches, sized optimally for charging to a furnace. By Institute of Recycling Industries (ISRI) standards, HMS must contain less than 1 percent of non-metal impurities.
HMS scrap comes in two designations, HMS 1 and HMS 2. Specifically, HMS 1 contains no blackened or galvanized steel, while HMS 2 does. While both are quite dense, HMS 1 has a minimum thickness requirement of 1/4 inch, while HMS 2 has a minimum thickness requirement of 1/8 inch. The ISRI provides further categorizations of HMS steel as described below.
HMS 1
HMS 1 consists of heavy melting steel scrap containing no galvanized or blackened steel, and having a minimum thickness of 1/4 inch. Further categories include:
ISRI-200: Pieces no larger than 60 x 24 inches optimized for charging
ISRI-201: Pieces no larger than 36 x 18 inches optimized for charging
ISRI-202: Pieces no larger than 60 x 18 inches optimized for charging
HMS 2
HMS 2 consists of heavy melting steel scrap containing galvanized or blackened steel, having a minimum thickness of 1/8 inch. Further categories include:
ISRI-203: Pieces no larger than 60 x 24 inches optimized for charging
ISRI-204: Pieces no larger than 36 x 18 inches optimized for charging. May include automobile scrap
ISRI-205: Pieces no larger than 36 x 18 inches optimized for charging. May include automobile scrap, but must be free of sheet iron or thin gauge material
ISRI-206: Pieces no larger than 60 x 18 inches optimized for charging. May include automobile scrap, but must be free of sheet iron or thin gauge material
Смотреть Больше
Подтверждающие Документы
Подтверждающие документы не найдены.
Деловые Данные
we export world wide copper,aluminium,nickel,stones,brass,aluminium etx